features •
Accident Image Storage When an accident occurs, this device automatically detects it through an impact sensor and records and saves images before and after accidents.
• Manual Image Storage
Even without physical impact to the vehicle from an accident, the device can record and store video on a loop.
The driver can “tag” the video at any point by pressing the emergency button.
• Location Information Storage
The device records and stores detailed GPS information including the time, speed and location in the event of an accident.
• Google Map
Overlays GPS coordinates in a visual display using Google Earth
• MPEG4 Compression
• Recording Quality : Rough, Low, Standard, High, Fine
• Video 1CH
• Audio 1CH
• GPS (Google Map Support)
• SD Card : 16gb SDHC Support
• Shock-sensor built-in (Default : 0.6G (0.1~1.5G)
• Alarm Function
• Pre/Post alarm : Pre-alarm (0~10sec)  Post-alarm (5~30sec)
• 1.3 MEGA Pixel CMOS
• Resolution : QVGA(320x240), VGA(640x480), MEGA(1280x960)
• Recording: Single mode (Record on shock sensor or emergency button)
• Multi mode: Always recording on power up.
• Overwrite function
• Lens 2.5mm (Angle of View: 140deg) client programme RH-1 Digital Driver Protection System roadhawk Google Map Shock sensor Car Speed
• Vehicle Operation Information Storage The device records and stores certain vehicle motions including sudden acceleration, braking and sharp turns, as well as back and forth, right and left and up and down vibrations.
• Accident Data Replay In addition to accident data replay on Pcs, it also simultaneously plays the GPS Information and vehicle operation information.
A software program is also provided that is simple and easy to use in setting various functions including useroriented separate storage, printing, and screen shots.
• Camera Lens
The adjustable, wide angled camera lens captures your entire front view day or night.
• SD Memory Card Slot After inserting an SD card in to the slot, connect the power cable.
• Power Terminal
When power is connected, RH-1 turns on and starts recording automatically.
• Emergency Button
The Emergency button is used to store or “TAG” an event even if an accident has not happened.
• Recording LED (Red)
The Record LED will turn on during recording and will blink if an event occurs or the emergency button is pressed.
• GPS LED (Blue)
The GPS light will come on to tell you that GPS data is being received from satellites. name of the parts specifications recording table

CONTACT US: cameras4sports Roadhawk UK, Phone: +44(0)1892 533 577 •